Vlad the Clad

Greetings, I’m Vlad the Clad, the Cladding Warehouse plastics guru. I know my polyethylene from my polypropylene and I have over 30 years cladding system expertise. Ask me anything you want using the form below and I’ll email you an answer.

I might post your question and my answer online and share it with visitors to this website (but I won't publish your full name or your email address.) If you have an urgent question please call me for fast, free, no-obligation advice.

VLAD'S POSTING RULES
1. Make it cladding-related (If not, make it interesting)
2. Keep it clean (that's what cladding's for)
3. Don't name names (our lawyers came up with that one)

Ask Vlad a Question

how ar g208 ceiling tiles fitted

Hi,

Ceiling tiles are installed in exactly the same way as a traditional ceiling tile, cut to size at the perimeter where required with a jigsaw, (fine blade)! Fit within a standard grid. 

The advantage of the tile is, it can be fully immersed in water to be cleaned, which in any food environment is crucial as the life span of the tile is limitless. Possibly more costly in the short term but will save in the long term. 

Ideal for commercial kitchens, food production facilities, wet rooms etc.

You will not get these advantages off any other tile on the market.

Cheers VLAD 

I'm struggling to find the white plastic hollow batten that is used to make trailer light boards - or an effective and perhaps more durable substitute.

Can you help, please?

Regards, Mike

Mike,

Been looking at into alternatives for you but am struggling as i do not have a sample of the baton, can you send me a photo or dimensions at least and it may prove easier to locate.

cheers

Vlad

I am after a brick style cladding to put over the front of my shed do use stock it
Regards mark b

I will look into this for you, will be in touch soon.

Vlad

Hello. Do you sell 'matt' wall clad sheets rather than 'gloss' ones? Am looking for white colour.

Thanks

 Hi,

Thansk for your enquiry, i can confirm we supply matt sheets, 99% of our material sold is Matt!

Hope this helps

Vlad

What materials would i need for a two sided shower area,and can the sheets be fitted directly on to existing tiled area,i propose using the anti mrsa 2.5 or 3mm sheets white in colour

94 inches in height
32 x 32 width of shower base

Hi,

The sheets can be installed direct to sound tiles, the bonding should be the polymer bonding. I would suggest bending the internal corner which we can undertake for you at 24" x 24" and then installing two rips at 8" each side, this would make the system watertight.

Vlad

Is it possible to clad over wooden garage doors to cover up peeling paint and small areas of rotting timber.

Yes, we haev a couple of products which would suit this application, 407 plank and 2mm pvc would suffice

how much does you 15mm recycled sheets cost?

Ant,

The sheets are 18mm thcik and cost £42 per sheet.

Regards

Vlad

Hi,

A couple of questions: Are the white anti mrsa sheets suitable for fitting around a shower. Are the surfaces easily cleaned and not marked/stained easily by the use of and direct contact with shampoo and soaps.

Thank You

Hi mate,

Shower and soaps will not have a detrimental effect on the panels and is widely uiltised in shower/bathroom applications.

Cheers Mate

10mm PVC C - Plank 250 are these fire retardant / or identified as Class O : I have apprx 28m2 in total to carry out internally in 2 nr seperate rooms.

the planks are class 1 surface spread of flame, let me know what application you are thinking of util;ising the planks and i may be able to ofer a product suitabkle which meets class o.

Cheers

can you tell me if you can supply edge trims and internal corners in grey for the 10mm hollow form 407 plank (w135)

Hi,

The standard colour for the planks are white, we do have a grey colour trim, i will check the internal corners! 

Cheers .

Vladimir

Best cladding products in your opinion for walls and ceiling of chip shop?

Pvc k panel and the plank ceilings, dependant upon the ceiling height and height of the range!

We have undertaken numerous projects within fish shops with thjis material.

Vlad

Hi i have a wooden food trailer that i need to replace the wood for cladinf a my business is food how much would this type of cladding cost me

Hi susan,

If yiu can supply dimensions iof the trailer i'll work you out a cost.

Vlad

Gloss cladding for restaurant kitchen?
Thanks

We can supply Gloss, although i would suggest, satin/matt finish as this will hide any imperfectioons in the sub strate.

Vlad

Is the cladding tongue and grooved for fitting

The planks are tongue and grooved for ease of fitting.

There are some very cheap planks on the market which have a particularly poor fixing system so beware for those!

Vlad

need to know how many timber batons to fix to the wall for support,how far apart

Are you just cladding the calls in sheet or are you planking them ?

i need to get the white cladding for a room 6metre long by 3metre wide and 3metre high,also cladding for the ceiling.what is the biggest size it comes in.
thanking you

The largest sheet for cladding is 10' x 4', the longest plank for a ceiling is 4m you can always use a divider bar if you need the walls to be higher or the ceiling to be longer. 

can this product be put stuck on over existing wall tiles

Hi tres Yes this product can be glued straight over tiles.

Does your 3mm PVC K panels 8x4 come in any other colours?

Hi Raymond the 3mm is just for the white but colours are avaliable in a 2.5mm pvc 8' x 4' or 10' x 4'.  

Is it ok to use in a shower instead of tiles only it's only 2.5 thick ?

Hi Andrew yes its fine instead of tiles also you could choose a coloured sheet if you want instead of just white.

Hi
What is the best way of cutting 2mm sheet?
With saw or stanley knife
David

Hi David the best thing is a jigsaw with a fine blade.

what is the best way to cut 2.5 mm mrsa cladding? which tools should i use.

The best and easiest way is to use a jigsaw with a fine blade.

how much adhesive is needed per sheet of trovex please? - and cost please

If you are wanting to use the budget bonding we would receommend 3 tubes per sheet for a 8' x 4' and 4 tubes pwe 10' x 4' if you require the 2 part glue you would need 1 tub per sheet. 

We have cabin in our rear garden and we are thinking of cladding the external wooden walls to provide better insulation / better noise insulation. Is this possible Vlad

Hi Charlie yes there are various options for this please sent me your phone number then i can discuss this with you further thanks.

does cladding have fire rating

Hi Martin yes the sheet is a class 1surface spread of flame.

I want to clad the outside of a small wooden trailer(teardrop caravan) , would your products be suitable?, if so which one? would the PVC sheet bend round a 12 inch radius?, and how would you stick it to Plywood?

Thanks in advance,
CJ

Hi Chris The pvc would be fine if your trailer is already got plywood you can stick straight to that.  We can supply 2mm sheet that should be fine for what you are looking for. 

Thanks

Vlad

hi,

I have a few questions.

firstly - i am looking at the 1.5mm to replace tiles in the kitchen - would this be suitable? if i were to do this - what edging strip and corner trims would be best to use top and bottom?

2ndly - we are renovating a roughcast park home - do you have cladding that would be suitable for the exterior?

thanks in advance

Hi

Yes you can put the 1.5mm sheet straight over tiles if you wish the 2mm would be better as it is a bit thicker.  You can use either the 1 part or 2 part they both do the same job the 1 part is cheaper.  The internal radius corners are very neat its really down to what you want it to look like, please feel free to contact me to discuss further 07815 695010.

regards

Vlad

Hi, i am interested in your ceiling cladding (budget), do you charge for delivery to South Wales (UK), if so how much please? thank you.

Hi Dai

There will be a delivery charge if you add the items to your basket it will tell you the transport charge, or you can phone the office to speak to me its fine. 07815 695010

Thanks

Vlad

DO YOU OFFER A CUTTING SERVICE

Hi Linda

yes we do offer a cutting service for a small fee of £5 a cut.  Please done hesitate to contact me for any more help or information.

regards

Vlad

Hi,
I need cladding for internal walls of an outhouse where
the bricks had been gloss painted over previously. The walls are a little uneven. Would you advise 2.5mm PVC sheets or another thickness, and would you recommend using plugs and screws in appropriate spots for better security as well as adhesive generally ? Thanks.
John

Hi John

As the walls are uneven you have a fefw options you can either use the 10mm board which can be treated as a timber, this will form its own line or you could ply the walls then stick the 2mm or 2.5mm straight to the sheets.  The rivets arnt really the best way to fix the sheets we would normally just say use rivets if in the back of a van.  Hope this helps.

Thanks

Vlad

Hi, What colour's do you have in ceiling cladding that are over 3050mm long and 250mm wide. looking for white sparkle in these lengths so as there are no joints. Cheers

HI ROBERT

MANY THANKS FOR YOUR ENQUIRY, we ARE ABLE TO GET THESE PANELS MANUFACTURED TO A BESPOKE SIZE BUT THIS WILL CAUSE A CHANGE IN COST, JUST GIVE US A RING TO DISCUSS SIZES AND COSTS, WE ARE ALWAYS HAPPY TO HELP.

ONCA AGAIN MANY THANKS,

VLAD

Hi Vlad,
I would like to more about your product

Thanks

Kamal please feel free to ring 01274 578051 thanks

Do you sell cladding for bathroom ceiling in 3m lengths. I was looking for a white gloss, tongue and groove effect thanks andy

Andy

Many thanks for the enquiry

If you look on our website under the celings tab, the 250 and 407 plank fit your description perfectly,

Many Thanks

Vlad

Do any of you cladding sheets look like tiles? I am after PVC tile paneling for a shower block on my campsite?

Hi Jim

There are various different options you can either use one of the K-panel range sheets  or you can use the  c-plank range 250mm planks or 407mm planks, what are you fixing it to  ?

Thanks Vlad

Good morning, I am looking for some white plastic cladding to line a vet practice. We have used Whiteroc previously but like your product. What is the difference between the two?
Thanks, Tim.

Tim

Many thanks for your enquiry,

There are no differences between the sheets,

We offer the same guarantees, safety and hygienee ratings,

If you want more iformation on the matter do not hesitate ot give us a call on

01274 578 051

Many Thanks

Vlad

how does the budget cladding joint i.e t&g

Good Morning Mark

Many thanks for your enquiry, The budget cladding is joined together using the dividers shown on our webiste under fixings, if you still need assistance dont heisatte to give us a call!

Regards Vlad

Hi Vlad, I've been using your products on and off for years and have to say what great service you give. can you tell me, is your one part bonding that I have used before on plastic suitable for the stainless steel cladding? Many thanks John

Good Morning John,

We always aim to please, as for the one part bonding, this cannot be used for the stainless but i would recommend the Soudal HT Bonding, 3 per 8' Sheet, 4 per 10' sheet

Many thanks for your enquiry

Vlad

Hi. I'm looking for a sheet of 2.5 mm wall cladding approx 5ft tall by 3ft wide. I need to have a white high gloss finish too. Is there anything you would recommend?

Hi Paul Our sheets are a matt finish and the sizes are 8' x 4' or 10' x 4'  what were you wanting to do with the sheet ?

Hi,

Do you have a cutting service for 10fft x 4ft pvc sheets prior to delivery?

Thanks

Cheryl

Many thanks for your enquiry

We do have a cutting service, it comes at £5 a cut,

If you wish to order the sheets with cuts, give our lovely team a call on

01274 578 051

Many Thanks

Vlad

Hi how strong is the 1.5 pic budget sheat Thank you Regards k wotton

Hi Kevin

What are you wanting to do with the sheet then I can advise ?  

Hi,

Do you supply any contractors that would cover Argyll North West Scotland, im pricing a job that requires flooring and wall cladding.

Regards

Chris

Hi Chris

If you require a supply & fit job quoting please dont hesitate to contact me with the details and we can supply a quote.

Thanks

vlad , just recently had bathroom cladded in black glitter type cladding . about 5 x 2yards. also had ceilind done white with fitted lights. the problem is they dont glitter under the light as they should do . i know this because my mother had hers done the same

yours sincerely chris hargreaves

pHi Chris

Maybe you didnt order the planks with glitter in, how would you lkie me to help you with this ?

I would like to clad my porch, which would be two walls and a ceiling. if I gave the dimensions i need would you be able to cut to size for me and advise me of trims and adhesives I would need.
many thanks

Hi Margaret Yes please send the dimensions then I can work out what you require thanks

Do you stock anything like a matt white 3mm rigid plastic sheet?

Antony

Many thanks for your enquiry

If you go on our website, under the walls tab, page 2, our 3mm Sheet has a matt white finish

Many Thanks

Vlad

Looking to use in a staff kitchen which has a toaster which is currently causing a surface temperature on the wall behind of 110 deg - is your cladding suitable?

Eddie

Many thanks for your enquiry,

When installing our PVC sheets into a kitchen we recoomend to put a patch of stainless behind any heat sources, thus elimnating any risk of the sheet deforming,

In practise the working temperature of the sheet is 60 Celcius, but to ensure you have no problems we would recommend stainless steel for all areas that heat will be applied,

Many Thanks

Vlad

How many boards are in 1 square metre of cladding

Graham

Many thanks for your enquiry

In a 8' x 4' Sheet you have roughly 3m2 of cladding

Many Thanks

Vlad

Hi Vlad,

I am looking to put up some 2.5mm PVC K-Panels as shower wall panels, and am hoping you might be able to help.

The shower is within a corner and we would like to extend the panels approximately 1000mm from the corners, what materials fixings will I need i.e. internal corner, edge trim, top trim, adhesive, silicone, etc?

Secondly, I am finding it difficult to judge what your bold colours look like from the photos of your showroom as well as which description matches each colour; I was therefore wondering if you might be able to send me a clearer and labelled photo?

And thirdly, please could you send me your idiot-proof fixing guide I am unable to download it on your website?

Many thanks.

Hi Charlie

What are you wanting to fix the sheets to ?

Thanks Vlad

how much would a 2.5mm cladding w102 5' x8' panel cost

Hi Simon

We only do a 8' x 4' 9' x 4' or 10' x 4' sheet

Thanks Vlad

Is your pvc panels u v rated and do you send out samples , thank you

Hi Neil What were you wanting to use the sheet for  ?

do prices include vat

HIi Wayne the prices need vat putting ontop.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Hi do you supply bathroom cladding

Hi we do what kind of thing were you loking for ?  

fixing 2.5mm boards to ply walls in industrial unit. how ?

Hi John you can stick the sheets straight to ply by using the budget bonding or the 1 or 2 part glue.  Please dont hesitate to contact me gfor any more help or information.

thanks  

got a conservatory roof with polycarb sheets hot in summer as you know looked at most sites lot of money to pay so thought about cladding externaly with white plastic board stuck to polycarb sheets and sealed with silicone water goes off roof just the same and blocks sunlight whats your take on that

Hi Del are you wanting to over clad the ceiling ? please dont hesitate to contact me to discuss further 07815 695010 thanks

Hi,

I'm looking for a plastic sheet to use as the sides and top of a box van trailer. What would you recommend?

Thanks,
MArtin

Hi Martin

Are you planning on plying the  van first ? if so you can use any of the K-panel range and stick straight to plywood.

Thanks Vlad

A413c. Please can you let me have price for box of 200

Hi Tim they are £12.00 per 100

Thanks Vlad

Hi there
I need to cover a porch canopy with peeling paint, which has wooden batons already fitted to secure cladding. There was rotting chipboard there before. I need to cover the bottom of the canopy and the 3 sides which are visible. It protrudes from the house, so obviously the 4th side is attached to the house.
The dimensions of the canopy are 200cm length x 75cm width x 13cm thickness.
I can see you sell the sheets - probably the 2mm K-panel sheet would be right to cover the underside, but I can't seem to find the strips to cover the 3 sides. I'm looking under the 'Walls' section of your web-site, but hopefully you can guide me to where they are.
Thank you.
Alistair

Hi

Are you just looking for the trim for the sheets to slot into at the bottom ? if so they are in the fixings section page 2 Edge strip.

Thanks Vlad

I will try to explain this as best as i possibly can, here goes:
I have two garden sheds joined together which I use as a home based beauty salon the first shed is divided into 2 sections by a partitioning wall the 1st section being 10ft (l) x 8ft(w) (a door measuring 32.5inch (w) x 79.5 (h) and a window 23ich (w) x 41.5 (H) is to be deducted) and the 2nd section being 4.25ft x 8ft wide (this is literally a cubicle which I use for spray tan within the cubicle there is 1 pvc window measuring 41.5inch (H) x 23 inch (w) Connecting the 1st, 2nd and 3rd sections is 2 sliding doors (30 X 76), Section 3 is 10.5ft X8ft no windows or doors. I want the ceilings done in pvc sheeting also possibly tongue and groove effect. I want either plain white pvc cladding or white with a glitter through it for sections 1 and 3 but black glitter or plain black for section 2 inc black ceiling panels. I would like silver joints, can you determine how many I need and give me a ? Apologies from a confused female

Hi Heather

Please mail me your number then I can contact you.

Thanks Vlad

hi need high impact white hygiene board what do you recommend it is for a doggie day care centre

Hi Carol

All the Pvc sheets are impact resistant so they should be fine for a doggie day care centre. Pvc sheets are becoming very popular for this application.

Thanks Vlad

hi,did you have any good adhesive in stock for 2mm wall cladding?

Hi All the adhesives shown on the site are in stock, its down to personal preference which one you choose. Your can either use the budget bonding which is in a tube the 1 part glue out of a tub which you put on with a trowel or the 2 part which you mix.

Thanks Vlad

Hi what is the best hygienic wall cladding to use in a commercial kitchen ? And is it suitable to be stuck directly onto a tiled wall? Thanks

Hi Mark

Any of the K-Panel range from 2mm 2.5mm can be fixed straight over tiles.  You will need to degrease them first and if there are any loose tiles please take them off and pack out at the back.  You can use the 10mm H-panel but this is very expensive.  We supply all Mcdonalds restaurants with the 2.5mm K-panel and they fix straight over the top of tiles.

Thanks Vlad

we have 47 kennels that we would like to put a cladding on the brick walls to keep them cleaner. it would have dogs jumping up against them, so need to be fairly touch and wont scratch easily, would any of your products be ok for this purpose, thanks tricia

Hi Tricia

The sheets would be ideal for this, it will make cleaning a lot easier for you, more and more people seem to be using the sheets for animal centres.

Thanks Vlad

Do you do the hygenic wall cladding 2.5mm thick in a black?

Will it show finger prints if used on a door?

HI Steve

Are you wanting to clad the whole door or just a small section ?  It may show some finger prints I can send you a sample so you can have a look for yourself if you wish.

Thanks Vlad

Hi I wish to clad out my unit with 10mm board, it is of steel constructions with wooded batens which would be the best way to fix the board to the batens

Hi Carol You can use the 10mm boards and treat them as timber you could dab bond the, to the wooden battens, please dont hesitate to contact me for any more help or information.

Thanks Vlad

can we use spray on contact adhesive on the k cladding or will it affect the plastic?

Hi Keith

To be honest I would stick to the adhesives that we offer on the site as we know how they work with the sheets, what adhesive you use is as important as the sheet you choose, once /you have fitted the sheet it will be on for a long time so you want to get this part right.

Thanks Vlad

hi vlad I want to clad over my bath /shower directly onto tiles the dimensions are wall one behind shower 62cm wide x 160cm high one internal corner plus one wall 162cm wide x162cm high can you give me a price and quantity needed to do the job incuding adesives and trim

Hi Malcolm I believe we have spoken about this thanks Gill

Hi

Just wondering if you can bend sheets to a 90 degree angle? And if so whats the cost?

Hi Joel yes we can benda sheet for you to what ever size you want its £5.00 a bend thanks vlad

How does this cladding attach to the wall? We have brick walls, can we stick it on?

Hi Chris

You can stick the plastic sheets straight to the brick i would dvise to use the 2.5mm -Panel

Is there a connector piece available for joining the White 3m skirting lengths together on a straight run? Many thanks.

Hi Steve

There isnt a joint avaliable you just put them next to each other and seal up.

Thanks

Vlad 

Hi will the clading be appropraite on the kitchen ceiling

Hi The best product for a ceiling would be the c plank which comes in 250mm wide or 407mm wide planks.  please dont hesitate to contact me for any more help or information.

thanks Vlad

Can you let me know how much adhesive I'll require for 35 8x4 2mm sheets? sticking them to OSB. Will they also require screwing?
Many thanks

Hi jamie we would recommend 3 tubes per sheet for an 8' x 4' and 4 per sheet for a 10' x 4'

Hi, your 2.5mm K-panel white boards (W102A) are they a matt finish or high gloss? and the connector strips.
Thanks
Andy

Hi Andy

The sheets and trims are a matt finish.

thanks

Hi,

Do you supply samples of the wall cladding?
2.5mm K premium white
2.5 K bold orange, sky blue, purple & lime.

Thanks

Rich

Hi Richard

Yes I can send you samples please let me know your address and I will post them to you.

Thanks

Do you cut sheets to size and how much is shipping

Hi Mick

We can cut sheets to size for £5 per cut, the sheets are very easy to cut and can be cut with a jigsaw with a fine blade.

Thanks

Hello,

How much adhesive would you need per 8ftX4ft panel?

Thanks

Paul

HI PAUL

MANY THANKS FOR YOUR ENQUIRY, WE WOULD RECOMMEND 3 TUBES OF BUDGET BONDING PER 8' X 4' SHEET, OR IF YOU PREFER THE 1 PART BONDING TUB THIS CAN BE USED FOR 3 - 4 SHEETS PER TUB,

MANY THANKS

VLAD 

Looking for 250 mm wide x 300 mm long x 10 mm thick white ceiling cladding

Hi Richard,

The 250mm cladding can be found in the ceiling section of our website and is available in vaious different lengths.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Hi
I am looking for cladding for kitchen walls I would like it to be in red with tile shapes on it to look like tiles

Do you supply anything like this ?

Thanks for your help

Hi Sandra,

We do supply cladding with a tile look but unfortunatley this is currently only available in black or white.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Looking to clad an inside hall where my dogs live to make cleaning easier and protect the plaster walls. Would your sheets be able to be fixed to plaster walls?. Also are there corner pieces?
Thanks

Hi Pat,

Our sheets can be stuck straight onto plaster walls, corners and other trims are also available.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Do you do the ceiling cladding in white with silver spec in it.

Hi Mark,

This product can be found under the bathroom section of our website.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

hi Vlad
DC102B how long are these 250mm planks ? are they T&G flush finish
thanks Martin

HI MARTIN

MANY THANKS FOR YOUR ENQUIRY, THE TONGUE AND GROOVE FINISH IS FLUSH FIT AND THE PLANKS COME IN A RANGE OF LENTGHS FROM 2M - 4M,

ONCE AGAIN MANY THANKS

VLAD

Hi Vlad - trying to source a panel to go on a bare brick bathroom wall measuring 56" x 90". Have seen the 2.5mm K-panel in shades of the grey. Would it be possible to have one of these cut to size and would it be suitable? Would be brick show through underneath? Thanking you in advance.

HI HELEN,

THANKS FOR YOUR ENQUIRY, IT WOULD EASILY MEET YOUR REQUIREMENST ON SIZE ALTHOUGH I WOULD TAKE 2 SHEETS AND A JOINTING STRIP, WE ARE ABLE TO CUT THIS IF REQUIRED.

IT CAN BE GLUED TO BRICK ASLONG AS YOUR WALLS ARE FLUSH AND THE BRICKWORK WILL NOT SHOW THROUGH THE SHEETING.

MANY THANKS

VLAD

Could i stick the cladding over some silver insulation on my bedroom walls

Hi Sharon,

The surface that the cladding is being stuck on to must be hard for example timber, brick, plaster, plaster board or blockwork.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Hi, we are thinking of putting the cladding over well painted blown wallpaper within an office. The office is 7m x 4m.

What would you recommend to fix the cladding with?
How would you fix the corner strips to the wall?
Do the panel and fixings come with instructions?

Many thanks Claire

Hi Claire,

You could stick the cladding straight over the wallpaper. In the corners you could butt the sheets together and seal with a bead of silicone or you could plant an angle on (stick on.) I can send you instructions via email.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

Hi

I am in the process of upgrading my bathroom and want to fit a cladding ceiling with 6 spot lights.

A friend advised me that he did this in his bathroom, however when he turned his lights on, he could see the batons through the cladding.

Is there a thicker type of cladding that is required for this? Or did he do something wrong?

Cheers
Craig

Hi Craig.

You could buy the 407mm plank or the 250mm plank, both of which are ideal to be used in bathrooms. However, there are also decorative planks available which would do the job just as well.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

I have a railway arch to price for cladding the whole area it's all brickwork at the moment which has damp coming through what would be my best way to sort the problem out cheers

HI LEE

MANY THANKS FOR YOUR ENQUIRY, WE HAVE SEEN A PROJECT LIKE THIS BEFORE AND HAVE UTILIZED OUR CEILING PLANK SYSTEM, IT DOESNT ELIMINATE THE DAMP ISSUE BUT IT PUTS A HYGIENIC CEILING BETWEEN THE DAMP AND YOUR FACILITY, OUR MOST RECENT CASE STUDY WAS NEW COVENT GARDENS IN LONDON TO WHICH WE USED THE SAID METHOD ON 3 RAILWAY ARCHES.

IF YOU WANT TO GIVE US A CALL I WOULD BE MORE THAN HAPY TO EXPLAIN HOW THIS COULD BE DONE, THATS IF YOU CAN UNDERSTAND MY LANGUAGE...

MANY THANKS

VLAD

Could i put cladding over/ontop of my kitchen tiles

Hi Kaylee,

Yes, our sheets can be stuck over the top of tiles. We would advise you to degrease them first so it will stick better.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

I have lead cladding on the side of a dormer. Can I put UVPC cladding straight on top of it?

Hi Caty,

The cladding we supply is not for external use.

Please don't hesitate to contact me for further help and information on 01274578051

Thanks, Vlad.

I'm using the 2.5mm cladding
What jointing trims can I use ?

Hi Martin,

You can use a one part divider bar or a two part divider bar, these can be found on the second page of fixings on our website.

Please don't hesitate to contact me for any more help or information on 01274578051

Thanks, Vlad.

I am in the process of moving into a new residential log cabin, have been told by the manufacturer that for the first year or so, expansion and contraction will take place, therefor they don't recommend vertical fixtures I,e.plumbing, electrics etc.be fixed at highest and lowest points. If I were to fix 2.5mm K.panel round the bath and shower, is there an adhesive that is flexible enough I can use that will stick the above panels to the wooden walls and still allow the walls to expand /contract when the panels are only fixed at the highest point?

HI JOHN

MANY THANKS FOR YOUR ENQUIRY, AS FOR THE ADHESIVE WE WOULD RCOMMEND WHEN FACING SUCH A TASK, THE SOUDAL HT ADHESIVE ON OUR WEBSITE ALLOWS FOR EXPANSION AND CONTRACTION TO AN EXTENT, WE HAVE UNDERTAKEN A PROJECT SIMILAR TO THE ONE YOU ARE DESCRIBING WITH LOG CABINS ON A SHOOTING RANGE AND USED THIS ADHESIVE TO GREAT EFFECT.

ONCE AGAIN MANY THANKS

VLAD

Can your 2mm K-Panel Sheet be cut with a router?

Hi Darryn

Yes the sheets can be cut with a router.

Thanks

Hello Vlad,

Do you have samples of some of the plastics and if so how can i buy them?

Thank you!
Brogan

Hi Brogan

Please can you email me your adress and I'll send you some samples

Hello
I am renewing our indoor dog kennels and looking to use your sheets stuck directly onto the plywood sides and ceiling what thickness do you recommend and what adhesive would you advise in all about 40x8x4 sheets this is all new build
Kind Regards
Steve

Hi Steve

If you are sticking straight to ply you can use a 2mm sheet that would be the cheapest option.  You can either use budget bonding or tubs of glue.  please dont hesitate to contact me for any more help or information.

Thanks Gill

can you bend it 90 degrees

Hi Trevor

yes you can bend a sheet to 90 degree.

thanks GIll

am i able to get a sample of the wall cladding K - Panel 2.5mm and the 2.5mm Premium sheet so that i can tell the difference in quality?

Hi

Please mail me your address then i can post these out to you.

Thanks Gill

The white cladding panels priced 16.50 would they be suitable for a garage thanks

Hi Ian

Are you talking about a 1.5mm sheet ?

you really need to be fixing  1.5mm 2mm and 2.5mm to a flat surface or the sheet will belly.  Please dont heasitate to contact me for any more help or information.

thanks Gill

i am wanting to clad the internal sides of my boat with the white plank cladding. is there any flexibility in the plank to follow a curve? they will be running fore and aft, so it will only be the bend toward the bow

Hi Jon

Im not sure the plank will curve to the degree that you are wanting sorry.

Thanks Gill

Hi I want to clad up and over the walls and curved roof of a horse box I am converting into a mobile catering unit. IS the 1.5mm or 2mm cladding flexible enough for this?
Thanks

Hi Amanda

The sheet does have a certain amount of flex on the sheet you may struggle to fix it to the ceiling we would normally advise using planks for ceilings.  2mm is the correct material.

thanks Gill  

Hello, I've sent a couple of emails asking if you could cut a sheet of your 2.5mm K Panel ready for me to use? Is there an email address I can send a plan to if this is possible?

Hi David 

you can email gill@claddingwarehouse.co.uk 

thanks 

Do the wall clading sheets come in gloss finish , Could you possibly send me samples of wall panels & trims
Thanks
JAMES HENDERSON

Hi James 

we dont sell a gloss sheet there are all a Matt finish. I must say the bold colours do look glossy if you are after a colour.  Please mail me your address and I can send some samples if required.

thanks 

Gill 

Do you open on Saturday or Sunday?

No sorry 

Hi, I am looking at lining the inside of a horse lorry with either your 2or 2.5mm wall linings. Would this be suitable and are your sheets gloss or satin finish.
Regards Adrian

Hi Adrian 

yes the 2mm or 2.5 is ideal the sheets are a Matt finish.  Please don't hesitate to contact me for any more help or information,

thanks gill

We have a small bakery in a rented industrial unit.

We need to expand the working area.

We will be bonding the sheets to a painted breeze-block wall.

What do you recommend for cladding?

Many thanks

Alistair

Hi alistair

the  is ideal you can use either a 2mm or 2.5mm k-panel  stick straight to the breeze block.  Please don't hesitate to contact me for any more help or informatio.

thanks 

gill 

Hi im making a ply lid for my trailer
I was thinking of cladding in plastic and covering edges with aluminium what type of sheet do i need and how do i fix it thanks

Hi Mark

yo can either use 2mm k-panel or 2.5mm k-panel . Please don't hesitate to contact me for any more help or information.

thanks

gill 

Good morning,
I have to install 11 various sized splashback below hand towel and soap dispensers to protect the walls. I would like to use 2.5 K-Panel in white. If I was to send you the 11 dimensions could you quote for preparing and delivery to TW13 7AW please.

Hi Ian 

yes no problem pleas email to gill@claddingwarehouse.co.uk

thants 

gill 

Is it possible to have samples ?

Hi Peter

yes no problem what would you like samples of ? 

Thsnks 

Gill 

What adhesive

How can I help you ? 

Hi . could you tell me how the 1.5mm white cladding is delivered eg is it rolled up or is it in flat sheets, as I need to have it delivered to one address and taken by myself somewhere else
Thanks

Hi Keith it can can be rolled depends on how many sheets you order. How many are you wanting ?

thanks

Gill  

Hi

Can the Dumawall tile range be used in a wet room upstairs

Will they give a water resistant barrier and seal the bathroom from water leaking onto floor structure.

Regard's
Fran

Hi Fran

Dumawall is idal for bathrooms. it will need all joints sealing.

thanks 

Gill 

What is the recommended adhesive to stick the wall panels on with ??

Hi Barry 

It is down to personal choice and what you would prefer to work with either 1 part bonding 2 part bonding or tubes.  Please don't hesitate to contact me for any more help or informatio.

thanks 

Vlad 

Hi, can I stick 2mm wall panels directly to new skateboarder walls, thanks.

Hi Jimmy 

are you just wanting to line the walls with the k-panel ? 

Thansk 

 Vlad 

Do you do 12x4 sheets?

Hi Terrie

the largest sheet we do is 10' x 4' 

thanks 

 Vlad

Hello, I was about to buy the 1.5mm budget sheet
1.5mm 8' x 4' Budget Sheet, and I was wondering how easy is to cut it in different sizes? Thank you

HI Azahara 

You can cut it with a jigsaw or hack saw.

thanks 

vlad 

Morning

just a quick question can you use this cladding outside and can you Del to France.

Hi Laine

We can arrange delivery to France please let me know where abouts and I can quote for you.

thanks 

Vlad 

I have timber. Bullnose skirting boards,do you stock a plastic profile that can go on to of the timber skirting

Hi Chris

we haven't got these in stock but if you let me know the size you are wanting I can get it in for you.

thanks 

Vlad 

I want a smooth clean finish, like a drywal finish on top of tiles. What do you suggest?

Hi Tracy 

You can stick the k-panel straight over the top of tiles either in white of colours. Please don't hesitate to contact me for any more help or information,

thanks 

vlad 

can wall cladding be put straight onto plaster board in a bath room without plastering the wall first

Hi Una

Yez the plastic can be glued straight to the plasterboard. Please don't hesitate to contact me for any more help or informatoon.

Thanks Vlad 

Hi Vlad

Is it possible to get colour samples for the following please?
2.5mm K panel - Pastel Green, Olive Green, Pistachio and Pastel Grey.

My address is:
72 Common Lane
East Ardsley
Wakefield
WF3 2ED

Many thanks
Caroline

Hi Caroline 

I will put these in the post tonight.

thanks Vlad

do you supply an anti-static cleaner for wall cladding panels

Hi Ian we do an anti static spray. Fixings page 10 £6.70 + vat.

thanks 

Gill

Hi
Can we fix 2.5mm cladding straight onto studs to form toilet walls or do they need to be on a ply backing?
Thanks

Hi Jerry 

You will need to ply the wall first before you clad it so you are fixing to a solid surface.

thanks

Gill

I'm after white plastic sheets to put on ceilings. 8ft x 4ft x 1/8th

Hi Steve 

we wouldn't recommend putting sheets on the ceiling. You are better using planks.

thanks 

Gill

noticed youve been asked this before but your reply was a question about it. do you sell the board used for trailer light board it is 14cm wide by 2cm deep

Hi Jonathan

I've heard About that board sorry.

thanks gill 

What are my chances of success at putting a 90 degree bend in 2 mm white K-panel with a hot air gun and wooden former?

Hi Mr Savage

i wouldn't like to comment about a hot air gun I would t like to say what would happen. The safest option is to maybe let us bend it for you, or you can buy the trims required.

thanks 

Gill 

Hi,want to clad front of my shed what do I need

Hi Paul

we don't do external cladding sorry.

are the premium white panals a gloss finish

Hi Graham 

no thebpremiun sheets are a Matt finish.

thanks Vlad 

Do you stock any pvc wall panels suitable for kitchen which are 5mm thick?

Hi Mrs Caughey 

we don't do a 5mm cladding, you can use a 2mm or a 2.5mm for a kitchen in white or you can have bold colours.

thanks Vlad 

Can you get tops for cladding sheets

Hi Graham 

what do you mean by tops ? 

do you have an agent or shop in Ireland where I can buy pvc cladding. I need some for a large gate.

Hi Cepta if you give me your post code I can quote you we can deliver for you.

thanks Vlad 

how do you stick the cladding to the wall

Hi Roger

You can use either tubs of bonding. 1 part glue , 2 part glue or tubes of glue. It's down to personal preference what you want to work with.

thanks Vlad 

My bathroom ceiling is 1 1/2 m wide then slopes at a 45 degree angle another 1m.

Do you supply a trim that would join the 2 panels?

Alternatively, could I fix the thin 2.5mm wall cladding to the ceiling and but them together?

Also, as my kitchen ceiling is already very low, could I fit the thin cladding there too?

The kitchen length is 8' 6" so could I fit an 8' length and add a 6" strip ?

Lastly, I've removed the tiles and the walls are very uneven with the old tile adhesive in some areas.

Would you advise applying blue grit to make the walls more even before fixing the cladding?

Hi Dave,

You will need a flexi angle that can be found on our website under fixings page 1.

Thanks,

Vlad.

hi i put up some plastic cladding black glitter type but there's a clear film on it that's started to peel and crack looks like im going to buy some more to go over it.

Hi James 

is it the protective film that you haven't taken off ? Please feel free to send me a picture so I can try and help. 

Thanks Vlad 

i have just covered a shed roof with onduline sheets and ridge tiles. i have used one sheet and cut it in half to do both sides of the shed. they are 8" short at the top and.i need two plastic strips 8" wide by 10 ft long to fit under the ridge tile to make for the shortage. any sugestions?

Hi,

Unfortunatley our products are for internal use only.

Thanks,

Vlad.

Can I stick short lengths (500)of upvc clapding to a dwarf block wall please? or do I have to have battons?

Hi Jacqueline

you will have to ply the wall first so you can stick straight to it. Thanks Vlad 

We have a sliding door on our bathroom (just fitted) but they covered the runner with bulky wood, looked awful so took it off. Any suggestions to cover with PVC to look more stylish ? White ceiling panels with silver in bathroom.

Cheers

Chris C.

Hi Chris 

im not 100% sure what exactly you are looking for can you email me a picture.

thanks Vlad 

Hi There,
I am looking to clad an external breezeblock wall 80mm high 15m x8x 15 around the garden and would like it to look matt white.
Is there a product suitable for this?

Hi Bernard 

sorry we don't do external cladding.

thanks Vlad

Hi

I'm looking for cedar wood effect horizontal exterior cladding
have you any sugestions

Kind regards


John

Hi John 

We don't do a wood effect cladding sorry.

thanks Vlad 

Need a joining strip for sagging interior ceiling boards in my van- approx .6cm(can be more) wide and 4 metres of it in grey.Could you help me? I trust its flexible enough to follow the curve of the roof. I would just drill holes through it and screw into appropriate holes in roof support bar.

What thickness of panel are you fitting? 

Can you tell me what adesive i use for fixing
K panel sheets and how many i would need to fix 50 sheets
And cost

Hi Dave,

You need to use 3 tubes per sheet for an 8' x 4', 4 tubes for a 10' x 4'.

You need about 95% coverage per sheet.

Budget bonding is £2.75 per tube and HT high tack is £4.00 per tube.

Thanks,

Vlad.

I need to batten over the front door to screw my curtain pole to, the wall is not straight as it bulges slightly. Can I attach a plastic batten which will curve to the shape of the bend? It's about 170 cm long.

Hi Steve,

We do not have plastic batons, you will probably struggle if your wall isn't straight.

thanks,

Vlad

is it tongue and groove

250mm and 407 plank in the ceiling section are tongue and groove, the sheets aren't.

Thanks,

Vlad

I'm about to embark on making a commercial kitchen suitable for SALSA accreditation. Am looking at doing most of the wall covering myself (with help from a friend!). With regards to the 100mm skirting and lino flooring...how does this work when the flooring is put in? Does it go up the curve and clip in?

Hi Karl,

If you are wanting the floor to be curved up the wall our you need to use the single part divider bar which is to be fit 100mm off the floor then the flooring company can cove the sheet into the trim.

Another option would be to just plant the skirting over the top of the sheet and have a skirting detail at the bottom.

Just to point out, these are two different ways of fitting.

Thanks,

Vlad,

Do you hire the thermosoftening machines ?

Hi George,

Unfortunatley we do not hire the thermosoftening machines, however we can bend your sheets for you for a cost of £5 per bend.

Thanks,

Vlad.

Hi Vlad I work for Knightstone Housing Assc Maintenance Division. we have found in a number of properties we maintain, what looks like your 10mm Hollow 250 plank with a blue or grey swirl/marble type pattern on the face. Can you supply this and sent a colour swatch to establish correct colour.

Kind Regards

Steve Corber

Hi Steve,

Please email me your address and I will send you some samples.

Thanks,

Vlad.

Hi Vlad, I have ordered a load of 3mm hygienic matt sheets from you already . These are for OSB walls. Beside the H trims, what adhesive should I use and how much should I bead it on? ie. should I run a bead across the whole panel at 300mm spacing horizontally?

Thanks

Hi Chris,

If you visit fixings page 7/8 you can either use:

Budget bonding (3 tubes per sheet for an 8' or 4 tubes per sheet for a 10')

1 part bonding (1 tub per 3/4 sheets)

2 part bonding 6.5kg tub (1 tub per sheet)

Thanks,

Vlad.

Hi do you do made to measure?

Hi Kirsty,

Our standard sizes are 8'x4', 9'x4and 10'x4', if you require larger sheets you need to be ordering 300+ then we can get them manufactured.

Thanks,

Vlad.

Hi I am lookin into purchasing the 2.5MM K-PANEL BOLD COLOURS, and would require 3 for an shower. I would require 2 internal corner joints and some edge joints to go around the top as the ceiling Is higher that 8ft. Do you sell the coloured Clad seal base trims that sit on the shower tray? Also, what is the Weldrod Roll BOLD COLOURS for? Do you use this to join them wth the internal corner joints or do you just use the coloured silicone? Finally, do you offer free samples of the product or do we have to visit your showroom.
Thanks

Hi Joanne 

We don't sell a cladseal trim to match the sheets it's only available in white.  We can supply weld rod or divider bars internal corners and external corners to match the sheet And silicone.  Please feel free to send me your address then I can send you samples.

thanks 

Vlad 

Do you supply samples of the cladding??
I'm interested in providing a new "wipe" clean front to a new Club Bar
I apologise now as I will only require about 3 sheets
Thanks

Kevin Cole
Romford

HI Kevin,

Please email me your address and I can forward you some samples of our internal cladding.

Thanks,

Vlad.

I have a metal garage door I would like to clad. Can you suggest anything?

Hi Phil,

Is it internal or external?

Thanks,

Vlad.

Hi,
Looking at your 1.5 white sheets for cladding a 6m x 8m garage on a private property. We were going to use plasterboard but this looks as it may be a good alternative. Is it ok for wiping down to clean and how rigid is the 1.5mm. Is it ok on 60mm battens or do I need osb behind it
Thanks
Chris

Hi Chris,

The 1.5mm is very flexible and would need to be fixed to a solid surface. You could use the 10mm board as it is rigid and can be treat like a timber. You can find this on walls page 2 h panel.

Thanks,

Vlad. 

Can you repair a scuff mark on a wall cladding panel? A small mark has been found on a newly fitted panel which I think has been 'caught', albeit accidentally.

Best wishes

Hi Joan,

Unfortunatley, a scuff is unlikely to be repaired.

Thanks,

Vlad. 

i looking for clear see through pvc 1.5 mm sheets

Hi Billy

Are you wanting a perspex  ?

thanks Vlad  

Hi I am emailing regarding the placement of an order with yourselves at our Hospital Site in Liverpool - Our procurement Dept phoned and emailed your company to try and get an account set up with no luck . This Initial order is over £2000 - Can you help ?

Hi Anthony,

Please feel free to call Gill on 07815695010.

Thanks,

Vlad.

Is this product suitable for showers

Hi Lynn

All our products are suitable for showers.

thanks Vlad

Hi I am looking for white and coloured panelling matt if possible but edges need to be Tongue & Groove can you supply

Hi Shirley,

If you visit our ceiling section page 1 we have 250 mm or 407mm planks available in various different lengths.

Thanks,

Vlad.

Does your delivery charges include Scottish Islands.

Hi Jonathan,

Please email me your postcode and I can quote you correctly.

Thanks,

Vlad.

Can you stick the pvc wall panels straight onto wallpaper.

Hi Michelle,

You can glue straight over wallpaper, however I would advise removing any loose wallpaper before fixing.

Thanks,

Vlad.

hi I am looking for bathroom cladding but want it to look like white tiles can you help

Hi Jamie,

If you go to our wall section pages 2/3 there are some tile effect panels available or in the bathroom section page 2.

Thanks, 

Vlad.

Hi I am looking for wall cladding picollo grigio grey made by Dumo, Do you supply please 2.6 x 372 x 8 mm


Bob

Hi Bob,

Unfortunatley we do not stock that item, please feel free to email me a photo of the item and I will try and match it.

Thanks,

Vlad,

what is the best way to cut your white pvc sheet part number W101A

Hi Colin,

I would recommend using a jigsaw or a hack saw.

Vlad.

Hi glad
What is the best tool o cut the 2.5 cladding and is there any instruction videos on who to fit the cladding and trims. Or even paper instructions.

Hi Ivan.

The best thing to use to cut the sheets are a jigsaw or hack saw.

I will email you instructions now.

Vlad.

What adhesive would you use for 10mm plastic sheets, onto a wood frame?

Hi Steve,

I am guessing you are dab bonding it on. You can visit fixings page 7/8 on our website to shop the variety of glues available. I would recommend budget bonding or ht hogh tack.

Thank you,

Vlad.

How do u fix the cladding to wall tiles

Hi Caz, 

You can fix the cladding straight over the tiles using an adhesive, see fixings page 7 for various options of glue available.

Thanks,

Vlad,

Hi how flexible is your 2.5mm white plastic cladding.?Will it bend?

Hi Robert,

The sheet is a solid PVC, it will bend to a certain degree.  How were you wanting to bend it?

Thank you,

Vlad.

Do you do the ' standard 2" angle' in red ( to match red 2.5 mm panels )

Hi Dave,

Unfortunatley we only have the external F section which can be found in fixings page 2

Thanks,

Vlad.

Hi Vlad,

I need to replace my Caravan shower enclosure what the best finish to use Satin or Gloss? What is normal Upvc facias is that gloss or Satin? Thanks for your Help, Ted

Hi Ted,

All our sheets are a matte finish and would be ideal for a caravan shower, all you need to do is decide the colour :) 

Thanks,

Vlad.